ScopeAktien-Gesellschaft der Dillinger Hüttenwerke (Société Anonyme des Forges et Aciéries de Dilling)
24 capabilities
Accredited since February 2025
Verified Feb 2026
One of 3,039 in Germany
Details
Werkstraße 1
Dillingen 66763 , Germany
Dillingen 66763 , Germany
Accreditation
Active
DAkkS
D-PL-19890-01-01
Specialises in mechanical-technological testing of metallic materials, including tensile testing, hardness measurements, impact testing, metallographic examination, and sour-gas corrosion testing for pipeline and structural steel applications.
Accreditation Details
Accreditation Body
DAkkS
Number
D-PL-19890-01-01
Status
ActiveSince
13 February 2025
Accreditation is granted under EU Regulation 765/2008 and assessed against ISO/IEC 17025. Data sourced from official DAkkS records.
Download Scope PDFSend an Enquiry
Request a quote, ask about capacity, or discuss your testing requirements directly with this lab.
Test Capabilities (24)
| Standard Reference | Description | Category |
|---|---|---|
| ASTM G39 (2016) | ASTM G39 | Corrosion / Salt Spray |
| ASTM E 112 (2013) | ASTM E 112 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 16859-1 (2016-02) | DIN EN ISO 16859-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6506-1 (2006-03) | DIN EN ISO 6506-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6507-1 (2006-03) | DIN EN ISO 6507-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6508-1 (2006-03) | DIN EN ISO 6508-1 | Hardness (Vickers, Rockwell, Brinell) |
| ASTM E 208 (2020) | ASTM E 208 | Impact / Charpy / Izod |
| ASTM E 23 (2018) | ASTM E 23 | Impact / Charpy / Izod |
| ASTM E 436 (2003) | ASTM E 436 | Impact / Charpy / Izod |
| DIN EN 10274 (1999-07) | DIN EN 10274 | Impact / Charpy / Izod |
| ASTM E 45 (2013) | ASTM E45 | Mechanical |
| DIN EN 10247 (2017-09) | DIN EN 10247 | Mechanical |
| DIN EN ISO 643 (2013-05) | DIN EN ISO 643 | Mechanical |
| ASTM E1268 (2016) | ASTM E1268 | Non-Destructive Testing (NDT) |
| ASTM A 370 (2019) | ASTM A 370 | Tensile / Compression / Flexural |
| ASTM E 21 (2017) | ASTM E 21 | Tensile / Compression / Flexural |
| ASTM E 8/E 8M (2021) | ASTM E8/E 8M | Tensile / Compression / Flexural |
| ASTM E 9 (2019) | ASTM E 9 | Tensile / Compression / Flexural |
| DIN 50106 (1978-12) | DIN 50106 | Tensile / Compression / Flexural |
| DIN EN 6892-2 (2018-09) | DIN EN ISO 6892-2 | Tensile / Compression / Flexural |
| DIN EN ISO 7438 (2016-07) | DIN EN ISO 7438 | Tensile / Compression / Flexural |
| ASTM A 578/A 578M (2017) | ASTM A 578/A 578M | Ultrasonic Testing (UT) |
| DIN EN 10160 (1999-09) | DIN EN 10160 | Ultrasonic Testing (UT) |
| DIN EN 16809 (2020-02) | DIN EN ISO 16809 | Ultrasonic Testing (UT) |