ScopeGKN Driveline International GmbH Laboratories
48 capabilities
Accredited since July 2025
Verified Apr 2026
One of 3,039 in Germany
Details
Hauptstraße 130
Lohmar 53797 , Germany
Lohmar 53797 , Germany
Accreditation
Active
DAkkS
D-PL-11268-01-01
Performs physical, mechanical-technological characterization of complex materials, components and alloys including metallography and inclusion analysis via scanning electron microscopy. Conducts lubricant analysis, fatigue testing, and surface and dimensional measurements with flexible accreditation allowing selection and modification of standardized test procedures.
Accreditation Details
Accreditation Body
DAkkS
Number
D-PL-11268-01-01
Status
ActiveSince
28 July 2025
Accreditation is granted under EU Regulation 765/2008 and assessed against ISO/IEC 17025. Data sourced from official DAkkS records.
Download Scope PDFSend an Enquiry
Request a quote, ask about capacity, or discuss your testing requirements directly with this lab.
Test Capabilities (48)
| Standard Reference | Description | Category |
|---|---|---|
| ISO 1817 (2015-02) | ISO 1817 | Corrosion / Salt Spray |
| DIN EN 1183 (1997-08) | DIN EN ISO 1183 | Dimensional / Geometric |
| 2 | Bauart wie GR 1482 | Electrical |
| ISO 2781 (2018-06) | ISO 2781 | Elemental Analysis |
| DIN 53505 (2000-08) | DIN 53505 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN 826 (2013-05) | DIN EN ISO 22826 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 18203 (2022-07) | ISO 18203 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 4498 (2010-11) | DIN EN ISO 4498 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6506-1 (2006-03) | DIN EN ISO 6506-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6506-1 (2015-02) | ISO 6506-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6507-1 (2006-03) | DIN EN ISO 6507-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6507-1 (2018-07) | ISO 6507-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6508-1 (2006-03) | DIN EN ISO 6508-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 6508-1 (2016-12) | ISO 6508-1 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 868 (2003-10) | DIN EN ISO 868 | Hardness (Vickers, Rockwell, Brinell) |
| DIN EN ISO 9015-2 (2011-05) | DIN EN ISO 9015-2 | Hardness (Vickers, Rockwell, Brinell) |
| DIN ISO 48-2 (2021-02) | ISO 48-2 | Hardness (Vickers, Rockwell, Brinell) |
| DIN ISO 48-4 (2021-02) | ISO 48-4 | Hardness (Vickers, Rockwell, Brinell) |
| DIN ISO 7619-1 (2012-02) | DIN ISO 7619-1 | Hardness (Vickers, Rockwell, Brinell) |
| ASTM D 2137 (2011) | ASTM D 2137 | Impact / Charpy / Izod |
| ASTM D 1403 (2010) | ASTM D 1403 | Lubricants / Oils |
| ASTM D 1831 (2011) | ASTM D 1831 | Lubricants / Oils |
| ASTM D 217 (2017) | ASTM D 217 | Lubricants / Oils |
| ASTM D 5483 (2005) | ASTM D 5483 | Lubricants / Oils |
| ISO 13737 (2004-07) | ISO 13737 | Lubricants / Oils |
| ISO 2137 (2020-05) | ISO 2137 | Lubricants / Oils |
| ISO 5949 (1983-12) | ISO 5949 | Mechanical |
| DIN EN 13925-2 (2003-07) | DIN EN 13925-2 | Radiographic Testing (RT) |
| ASTM D 3418 (2015) | ASTM D 3418 | Spectroscopy (XRF, ICP, AAS) |
| ASTM E 975 (2013) | ASTM E 975 | Spectroscopy (XRF, ICP, AAS) |
| DIN 51451 (2020-02) | DIN 51451 | Spectroscopy (XRF, ICP, AAS) |
| DIN 51820 (2013-12) | DIN 51820 | Spectroscopy (XRF, ICP, AAS) |
| ASTM F1315 (2017) | ASTM F1315 | Tensile / Compression / Flexural |
| DIN 53504 (2017-03) | DIN 53504 | Tensile / Compression / Flexural |
| DIN EN ISO 11357-2 (2020-08) | ISO 11357-2 | Tensile / Compression / Flexural |
| DIN EN ISO 11357-3 (2025-09) | ISO 11357-3 | Tensile / Compression / Flexural |
| DIN EN ISO 815-1 (2016-09) | DIN ISO 815-1 | Tensile / Compression / Flexural |
| ISO 37 (2017-11) | ISO 37 | Tensile / Compression / Flexural |
| ASTM D5706 (2016) | ASTM D5706 | Torsion / Shear |
| ASTM D5707 (2019) | ASTM D5707 | Torsion / Shear |
| ASTM D6425 (2011) | ASTM D6425 | Torsion / Shear |
| ASTM D7217 (2011) | ASTM D7217 | Torsion / Shear |
| ASTM D7421 (2019) | ASTM D7421 | Torsion / Shear |
| ASTM D7594 (2019) | ASTM D7594 | Torsion / Shear |
| DIN 51834-1 (2010-11) | DIN 51834-1 | Torsion / Shear |
| DIN 51834-2 (2017-05) | DIN 51834-2 | Torsion / Shear |
| DIN 51834-3 (2008-12) | DIN 51834-3 | Torsion / Shear |
| ISO 19291 (2016-12) | ISO 19291 | Torsion / Shear |