Kögel Werkstoff- und Materialprüfsysteme

Official name: Kögel Werkstoff- und Materialprüfsysteme GmbH

167 capabilities Accredited since September 2025 Verified May 2026 One of 3,188 in Germany
Send Enquiry

Send one structured enquiry and we chase the reply for you. No cold email, no chasing.

Details

Arnoldplatz 8
Leipzig 04319 , Germany

Accreditation

Active DAkkS D-K-15009-01-01
Unclaimed listing · Claim this lab

Specialises in calibration of hardness indentation bodies and material testing equipment, including force, elongation, hardness, and mechanical work measurements on testing machines, with on-site capabilities for torque, mass, and force standards.

Accreditation Details

Accreditation Body

DAkkS

Number

D-K-15009-01-01

Status

Active

Since

11 September 2025

Accreditation is granted under EU Regulation 765/2008 and assessed against ISO/IEC 17025. Data sourced from official DAkkS records.

Download Scope PDF

Additional scope documents

Download Scope PDF · D-K-15009-01-00

Test Capabilities (167)
Standard Reference Description Category
- nichtselbsttätige Salt spray / neutral salt fog test (ISO 9227) Corrosion / Salt Spray
- Länge (WPM) Länge (WPM) Dimensional / Geometric
-1,0 mm -1,0 mm Dimensional / Geometric
0 mm 1350 mm Dimensional / Geometric
0 µm Vergrößerungsnormale Abflachung bis 300 µm Dimensional / Geometric
0,19 mm 0,19 mm Dimensional / Geometric
0,3 mm 0,3 mm Dimensional / Geometric
15 mm Kantenlänge 15 mm Dimensional / Geometric
Dickenmessgeräte Dickenmessgeräte Dimensional / Geometric
Dickenmessgeräte 0,1 mm Dickenmessgeräte 0,1 mm Dimensional / Geometric
Durchmesser 0 mm Durchmesser 0 mm Dimensional / Geometric
Eindringtiefe 0 mm Eindringtiefe 0 mm Dimensional / Geometric
Geschwindigkeit Traversen-geschwindigkeit Dimensional / Geometric
Geschwindigkeit (WPM) * 0,5 mm / min Geschwindigkeit (WPM) * 0,5 mm / min Dimensional / Geometric
Innen- und Tiefenmaße Innen- und Tiefenmaße Dimensional / Geometric
Längenänderungs- 0 mm Längenänderungs- 0 mm Dimensional / Geometric
Tiefenmess- - 1 mm Tiefenmess- - 1 mm Dimensional / Geometric
Winkel Winkel Dimensional / Geometric
messeinrichtungen 0 mm messeinrichtungen 0 mm Dimensional / Geometric
prüfmaschinen * 0 mm prüfmaschinen * 0 mm Dimensional / Geometric
Elektronische Radiated emissions (CISPR 32) EMC / EMI Testing
(WPM) nach DIN 0,01 N (WPM) nach DIN 0,01 N Force / Torque
- Kraft (WPM) Kraft (WPM) Force / Torque
0,01 N 0,01 N Force / Torque
0,01 N·m Drehmomentaufnehmer, 0,01 N·m Force / Torque
1 kN·m bis 1 kN·m bis Force / Torque
Handbetätigte Handbetätigte Force / Torque
Kalibriereinrichtungen für Kalibriereinrichtungen für Force / Torque
Kalibrierung der Kalibrierung der Force / Torque
Kraft Kraft Force / Torque
Kraft 0,7 mN Kraft 0,7 mN Force / Torque
Messeinrichtungen von messeinrichtungen von Force / Torque
Waagen * Waagen * Force / Torque
Werkstoff-prüfmaschinen Werkstoffprüfmaschinen Force / Torque
(WPM) nach DIN (WPM) nach DIN Hardness (Vickers, Rockwell, Brinell)
-3 30 HV 0,03 Hardness (Vickers, Rockwell, Brinell)
0 IRHD 30 IRHD Hardness (Vickers, Rockwell, Brinell)
0,05 30 HV 0,05 Hardness (Vickers, Rockwell, Brinell)
0,1 50 HK 0,1 Hardness (Vickers, Rockwell, Brinell)
10 HR45TW 10 HR45TW Hardness (Vickers, Rockwell, Brinell)
10 HRB 10 HRB Hardness (Vickers, Rockwell, Brinell)
10 HRBW Härtevergleichsplatten 10 HRBW Hardness (Vickers, Rockwell, Brinell)
10 HRC Rockwell-Verfahren * 10 HRC Hardness (Vickers, Rockwell, Brinell)
10 HRT 10 HRT Hardness (Vickers, Rockwell, Brinell)
10/1000 10/1000 Hardness (Vickers, Rockwell, Brinell)
10/3000 10/3000 Hardness (Vickers, Rockwell, Brinell)
10/500 10/500 Hardness (Vickers, Rockwell, Brinell)
100 100 HV 100 Hardness (Vickers, Rockwell, Brinell)
100 HBT 100 HBT Hardness (Vickers, Rockwell, Brinell)
100 HV 100 HV Hardness (Vickers, Rockwell, Brinell)
150 HV 150 150 HV 150 Hardness (Vickers, Rockwell, Brinell)
16 HBW 16 HBW Hardness (Vickers, Rockwell, Brinell)
16 HBW 1/5 Härtevergleichsplatten 16 HBW 1/5 Hardness (Vickers, Rockwell, Brinell)
2) HK 0,01 - HK 2) Hardness (Vickers, Rockwell, Brinell)
2,5/15,625 2,5/15,625 Hardness (Vickers, Rockwell, Brinell)
2,5/187,5 Durchmesser 2,5 mm HR2,5/187,5 Hardness (Vickers, Rockwell, Brinell)
2,5/31,25 2,5/31,25 Hardness (Vickers, Rockwell, Brinell)
2,5/62,5 platten nach Rockwell- HR2,5/62,5 Hardness (Vickers, Rockwell, Brinell)
20 HR 20 HR Hardness (Vickers, Rockwell, Brinell)
20 HR45N 20 HR45N Hardness (Vickers, Rockwell, Brinell)
20 HRA 20 HRA Hardness (Vickers, Rockwell, Brinell)
20 HRN 20 HRN Hardness (Vickers, Rockwell, Brinell)
200 HBW 200 HBW Hardness (Vickers, Rockwell, Brinell)
250 HLG 250 HLG Hardness (Vickers, Rockwell, Brinell)
29 HR30TW 29 HR30TW Hardness (Vickers, Rockwell, Brinell)
3 HBW 3 HBW Hardness (Vickers, Rockwell, Brinell)
30 HRG 30 HRG Hardness (Vickers, Rockwell, Brinell)
30 HRGW 30 HRGW Hardness (Vickers, Rockwell, Brinell)
30 HV 30 HV Hardness (Vickers, Rockwell, Brinell)
30 HV 0,01 30 HV 0,01 Hardness (Vickers, Rockwell, Brinell)
30 HV 0,025 30 HV 0,025 Hardness (Vickers, Rockwell, Brinell)
30 HV 0,1 30 HV 0,1 Hardness (Vickers, Rockwell, Brinell)
30 HV 0,2 30 HV 0,2 Hardness (Vickers, Rockwell, Brinell)
30 HV 0,3 30 HV 0,3 Hardness (Vickers, Rockwell, Brinell)
30 HV 0,5 30 HV 0,5 Hardness (Vickers, Rockwell, Brinell)
30 HV 0,8 30 HV 0,8 Hardness (Vickers, Rockwell, Brinell)
30 HV 1 30 HV 1 Hardness (Vickers, Rockwell, Brinell)
30 HV 10 30 HV 10 Hardness (Vickers, Rockwell, Brinell)
30 HV 2 30 HV 2 Hardness (Vickers, Rockwell, Brinell)
30 HV 20 30 HV 20 Hardness (Vickers, Rockwell, Brinell)
30 HV 3 30 HV 3 Hardness (Vickers, Rockwell, Brinell)
30 HV 30 30 HV 30 Hardness (Vickers, Rockwell, Brinell)
30 HV 5 30 HV 5 Hardness (Vickers, Rockwell, Brinell)
32 HBW 32 HBW Hardness (Vickers, Rockwell, Brinell)
40 HRD 40 HRD Hardness (Vickers, Rockwell, Brinell)
40 HRK 40 HRK Hardness (Vickers, Rockwell, Brinell)
40 HRKW 40 HRKW Hardness (Vickers, Rockwell, Brinell)
400 HL 400 HL Hardness (Vickers, Rockwell, Brinell)
42 HR30N 42 HR30N Hardness (Vickers, Rockwell, Brinell)
50 HK 0,01 Härte 50 HK 0,01 Hardness (Vickers, Rockwell, Brinell)
50 HK 0,025 50 HK 0,025 Hardness (Vickers, Rockwell, Brinell)
50 HK 0,03 50 HK 0,03 Hardness (Vickers, Rockwell, Brinell)
50 HK 0,05 50 HK 0,05 Hardness (Vickers, Rockwell, Brinell)
50 HK 0,2 50 HK 0,2 Hardness (Vickers, Rockwell, Brinell)
50 HK 0,3 50 HK 0,3 Hardness (Vickers, Rockwell, Brinell)
50 HK 0,5 50 HK 0,5 Hardness (Vickers, Rockwell, Brinell)
50 HK 1 50 HK 1 Hardness (Vickers, Rockwell, Brinell)
50 HK 2 50 HK 2 Hardness (Vickers, Rockwell, Brinell)
50 HV 50 50 HV 50 Hardness (Vickers, Rockwell, Brinell)
51220 * nach DIN 51220 * Hardness (Vickers, Rockwell, Brinell)
55 HRF 55 HRF Hardness (Vickers, Rockwell, Brinell)
60 HBT 60 HBT Hardness (Vickers, Rockwell, Brinell)
60 HK 60 HK Hardness (Vickers, Rockwell, Brinell)
60 HRFW 60 HRFW Hardness (Vickers, Rockwell, Brinell)
60 HV 60 60 HV 60 Hardness (Vickers, Rockwell, Brinell)
67 HR15TW 67 HR15TW Hardness (Vickers, Rockwell, Brinell)
70 HR15N 70 HR15N Hardness (Vickers, Rockwell, Brinell)
70 HRE 70 HRE Hardness (Vickers, Rockwell, Brinell)
70 HREW 70 HREW Hardness (Vickers, Rockwell, Brinell)
8 HBW 8 HBW Hardness (Vickers, Rockwell, Brinell)
80 HRH 80 HRH Hardness (Vickers, Rockwell, Brinell)
80 HRHW 80 HRHW Hardness (Vickers, Rockwell, Brinell)
9,9 IRHD 9,9 IRHD Hardness (Vickers, Rockwell, Brinell)
95 HBW 95 HBW Hardness (Vickers, Rockwell, Brinell)
95 HBW 1/30 95 HBW 1/30 Hardness (Vickers, Rockwell, Brinell)
DL, D+15 * 300 HL DL, D+15 * 300 HL Hardness (Vickers, Rockwell, Brinell)
Eindringkörper für 75° Eindringkörper für 75° Hardness (Vickers, Rockwell, Brinell)
Eindringtiefe Eindringtiefe Hardness (Vickers, Rockwell, Brinell)
Eindruckverfahren * Eindruckverfahren * Hardness (Vickers, Rockwell, Brinell)
HMM HMMHBW HMM HMMHBW Hardness (Vickers, Rockwell, Brinell)
HV 5 - HV 150) HV 5 - HV 150) Hardness (Vickers, Rockwell, Brinell)
Härte-prüfmaschinen Härteprüfmaschinen Hardness (Vickers, Rockwell, Brinell)
Härteprüfgeräte Härteprüfgeräte Hardness (Vickers, Rockwell, Brinell)
Härteprüfmaschinen nach Härteprüfmaschinen nach Hardness (Vickers, Rockwell, Brinell)
Härtevergleichsplatten 250 HLD Härtevergleichsplatten 250 HLD Hardness (Vickers, Rockwell, Brinell)
Härtevergleichsplatten 30 HV 0,015 Härtevergleichsplatten 30 HV 0,015 Hardness (Vickers, Rockwell, Brinell)
Härtevergleichsplatten 50 HK 0,015 Härtevergleichsplatten 50 HK 0,015 Hardness (Vickers, Rockwell, Brinell)
IRHD H 30 IRHD IRHD H 30 IRHD Hardness (Vickers, Rockwell, Brinell)
IRHD L 9,9 IRHD IRHD L 9,9 IRHD Hardness (Vickers, Rockwell, Brinell)
IRHD M 30 IRHD IRHD M 30 IRHD Hardness (Vickers, Rockwell, Brinell)
IRHD N 30 IRHD IRHD N 30 IRHD Hardness (Vickers, Rockwell, Brinell)
Knoop-Verfahren * 50 HK 0,02 Knoop-Verfahren * 50 HK 0,02 Hardness (Vickers, Rockwell, Brinell)
Konventioneller Konventioneller Hardness (Vickers, Rockwell, Brinell)
Kugeldurchmesser * Kugeldurchmesser * Hardness (Vickers, Rockwell, Brinell)
Kugelradius * Kugelradius * Hardness (Vickers, Rockwell, Brinell)
Leeb-Verfahren * Leeb-Verfahren * Hardness (Vickers, Rockwell, Brinell)
Länge der Länge der Hardness (Vickers, Rockwell, Brinell)
Mobile HMMHRC Mobile HMMHRC Hardness (Vickers, Rockwell, Brinell)
OO * OO * Hardness (Vickers, Rockwell, Brinell)
S, C, DL, D+15 * S, C, DL, D+15 * Hardness (Vickers, Rockwell, Brinell)
Schnittlinien * Schnittlinien * Hardness (Vickers, Rockwell, Brinell)
Schraubwerkzeuge * schraubwerkzeuge * Hardness (Vickers, Rockwell, Brinell)
Shore A, D, AO, AM, 0 Shore Shore A, D, AO, AM, 0 Shore Hardness (Vickers, Rockwell, Brinell)
Taschen- 9,9 IRHD Taschen- 9,9 IRHD Hardness (Vickers, Rockwell, Brinell)
Typ G * Typ G * Hardness (Vickers, Rockwell, Brinell)
Typ G * 400 HL Typ G * 400 HL Hardness (Vickers, Rockwell, Brinell)
Typen D/DC, E, 300 HL Typen D/DC, E, 300 HL Hardness (Vickers, Rockwell, Brinell)
Vickers-Verfahren * 30 HV 0,02 Vickers-Verfahren * 30 HV 0,02 Hardness (Vickers, Rockwell, Brinell)
Wägewert / Wägewert/ Hardness (Vickers, Rockwell, Brinell)
geschwindigkeit * geschwindigkeit * Hardness (Vickers, Rockwell, Brinell)
maschinen (WPM) maschinen (WPM) Hardness (Vickers, Rockwell, Brinell)
maschinen * maschinen * Hardness (Vickers, Rockwell, Brinell)
prüfgeräte * prüfgeräte * Hardness (Vickers, Rockwell, Brinell)
prüfmaschinen * prüfmaschinen * Hardness (Vickers, Rockwell, Brinell)
tungen von Härte- -1,0 mm tungen von Härte- -1,0 mm Hardness (Vickers, Rockwell, Brinell)
DIN EN ISO 148-1 (2017-05) Charpy impact test (ISO 148-1) Impact / Charpy / Izod
Fallstrecke freie Fallstrecke Impact / Charpy / Izod
Mechanische Arbeit Mechanische Arbeit Impact / Charpy / Izod
einrichtungen * 0,2 J einrichtungen * 0,2 J Impact / Charpy / Izod
0 Shore Sound intensity — scanning method part 2 (ISO 9614-2) Noise / Acoustics
0,1 N Noise measurement on railway vehicles — silencer/muffler testing (DIN 25008) Noise / Acoustics
0° Sound system equipment — speech transmission index (IEC/EN 60268-16) Noise / Acoustics
Härte (WPM) Sound intensity — scanning method (ISO 9614-1) Noise / Acoustics
30 IRHD M Railway testing reference handbook part 2 (DIN Taschenbuch 491/2) Rail Dynamic Behaviour / Running Tests
Durchmesser Railway maintenance — track geometry (EN 14253) Rail Dynamic Behaviour / Running Tests
(WPM) Hand-arm vibration — measurement (ISO 5349-1) Vibration / Shock
0 mm Mechanical vibration — evaluation of machine vibration by measurements on non-rotating parts (ISO 10816-1) Vibration / Shock

Send an Enquiry

Request a quote, ask about capacity, or discuss your testing requirements directly with this lab.

Please select a test method from the list
Report incorrect or outdated information
0 labs selected
Compare